Blowfish FAQ - Home of the 99c Unlock Code

Recommended Blowfish

search by category

Faq’s

Who is Blowfish06 .com ?

home to the most advanced unlock server codes in the world. Over at The Global Wireless Team we function as a team and are considered to be an industry leader in unlocking mobile phones by means of remote codes worldwide. Blow fish unlock Code Codes offers individual's online access to its state of the art fully automated, web based system. We pride ourselves on our ability to provide customers with the lowest prices, lighting fast turnaround times.

Q Why 99c Unlock Code?

We are sick of greedy unlockers on ebay and craigs list scamming people online.

Q: How Fast?

We Unlock Codes very fast - Some are Instantly!

Q 100% Guarantee Free Unlocking Instructions?

We can unlock any phone

0 Attempts Remaining: If the phone shows '0', your phone has already been hardlocked and cannot be unlocked by code. Even if you correctly enter the code, phone will still say "Code Error, Please Wait...".

How to Enter Unlock Codes on ANY BlackBerry Bold (9000), Bold 2 (9700), Javelin (8900), Gemini (8520, 9300), 8800, 8820, Curve (8300, 8310, 8320):

Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) Press following buttons: mepd - If 'Network' says 'Active', phone is locked and continue doing instruction Step #7. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #7 since prompt will not show for unlocked phones.
7) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
8) Now you will see a prompt asking you to enter the 'Network MEP code' which is the Unlock Code povided. This screen will show attempts remaining in parentheses, example: (10). If prompts reads: (0), phone is already hardlocked and entering correct code will still show 'Code Error, please wait..'.
9) Enter the 8 or 16 digit unlock code and then press trackball to confirm (If you delay too long after entering code, screen will disappear and you will need to retype again) and your phone is now unlocked!

How to Enter Unlock Codes on Bell Canada 9700 (Bold 2 Onyx):

Note: You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) Press following buttons: mepd - If 'Network' says 'Active', phone is locked and continue doing instruction Step #7. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #7 since prompt will not show for unlocked phones.
7) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
8) It will ask you for the mep2 code. Enter the 8 digit MEP Code and then press trackball to confirm.
9) After getting message 'Code Accepted', HOLD ALT and press the following: mep4 (Please note that you will NOT see what you type on the screen)
10) It will ask you for the mep4 code. Enter the 8 digit MEP Code and then press trackball to confirm. You phone is now unlocked!

How to Enter Unlock Codes on Telus Canada 9700 (Bold 2 Onyx):

Note: You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep4 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter the 16 digit unlock code and then press trackball to confirm and your phone is unlocked!

How to Enter Unlock Codes on BlackBerry Pearl (8100, 8110, 8120, 8220):

Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) Press following buttons: meppd - If 'Network' says 'Active', phone is locked and continue doing instruction Step #7. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #7 since prompt will not show for unlocked phones.
7) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
8) Now you will see a prompt asking you to enter the 'Network MEP code' which is the Unlock Code povided. This screen will show attempts remaining in parentheses, example: (10). If prompts reads: (0), phone is already hardlocked and entering correct code will still show 'Code Error, please wait..'.
9) Enter the 8 or 16 digit unlock code and then press trackball to confirm (If you delay too long after entering code, screen will disappear and you will need to retype again) and your phone is now unlocked!

How to Enter Unlock Codes on BlackBerry 8830:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

No AT&T/T-mobile Usage: This is a dual-band phone, it will NOT work in North America but will work fine in Europe, Asia, South America where they use the other set of frequencies.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) Press following buttons: mepd - If 'Network' says 'Active', phone is locked and continue doing instruction Step #7. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #7 since prompt will not show for unlocked phones. If 'Network' says 'Unknown' this means the phone has no SIM inside the phone or that the phone is not recognizing the SIM card and you need to insert a different SIM card. If 'Network' says 'Blocked' this means the phone is already hardlocked due to too many wrong attempts and there is nothing to do to unlock this phone
7) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
8) It will ask you for the unlock code. Enter the 8 digit unlock code and then press trackball to confirm and your phone is unlocked!

Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then restart the phone since phone is now unlocked. It is showing 10 attempts repeatedly due to being a glitch.

How to Enter Unlock Codes on BlackBerry 8700/8700c/8700g:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) Press following buttons: mepd - If 'Network' says 'Active', phone is locked and continue doing instruction Step #7. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #7 since prompt will not show for unlocked phones.
7) HOLD ALT and press: mepe (Please note that you will NOT see what you type on the screen)
8) Now you will see a prompt asking you to enter the 'Network MEP code' which is the Unlock Code povided. This screen will show attempts remaining in parentheses, example: (10). If prompts reads: (0), phone is already hardlocked and entering correct code will still show 'Code Error, please wait..'.
9) Enter the 8 or 16 digit unlock code and then press trackball to confirm (If you delay too long after entering code, screen will disappear and you will need to retype again) and your phone is now unlocked!

How to Enter Unlock Codes on BlackBerry 7105t:

Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power phone on and turn off the radio (Turn Wireless Off option)
2) Go to Tools
3) Go to Settings
4) Go to Options and select Advanced Options
5) Go to SIM Card
6) Type "MEPPD" (please note that you will not see what you type on the screen)
7) HOLD ALT and press mepp2
8) Enter the Unlock Code
9) Press enter (press on Trackball)
10) Reboot device. Device is now unlocked

How to Enter Unlock Codes on BlackBerry 7100/7130/7130c:

Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.

1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!

How to Enter Unlock Codes on Blackberry 5xxx, 6xxx, 7xxx (Except for 7100):

Note: After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Options.
3) Scroll to SIM CARD then press jog dial in once to select it
4) HOLD ALT (Half moon key on the lower left side) and press: mepe (Please note that you will NOT see what you type on the screen)
5) It will ask you for the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked!

How to Enter Unlock Codes on Verizon BlackBerry Storm (9530) - (INSTRUCTIONS FOR STORM 2 9550 BELOW):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
For Unlocking Storm 2: Try the unlock process with a SIM card besides Verizon
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Inside Settings menu, Click Options, then Mobile Network, on the switch technology to 'Global' if that has not been done.
Exception: If phone prompts 'Would you like your Blackberry to automatically select CDMA or GSM based on network availability', select No.
7) Now click the Back Arrow Button (Next to the Red End Call button) and select Advanced Options and then SIM Card
8) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
9) Press following buttons: mepd or meppd- If 'Network' says 'Active', phone is locked and continue doing instruction Step #10. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #10 since prompt will not show for unlocked phones. If 'Network' says 'Unknown' this means the phone has no SIM inside the phone or that the phone is not recognizing the SIM card and you need to insert a different SIM card. If 'Network' says 'Blocked' this means the phone is already hardlocked due to too many wrong attempts and there is nothing to do to unlock this phone
10) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code which is the unlock code (Please note that you will NOT see what you type on the screen)
Exception: If nothing is prompting up and you are making sure you are selecting each button by press the screen in, do a wipe handheld to reset the phone to manufacturer default: http://forums.crackberry.com/showthread.php?t=110075
11) Enter the 16 digit unlock code, Remember you ONLY have 10 chances to get it right. If use up all attempts, phone is HARDLOCKED
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with Step 13, this is a glitch on the phone
12) Press the Enter key (Button that looks like a backwards L arrow)
13) A message will appear saying Code Accepted
14) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device off is necessary even if you have SIM of choice inserted.
15) Turn the phone back on
16) Go to Settings, then Options, then Mobile Network, on the third row switch Network Technology to GSM/UMTS.
17) Press the Back Arrow Button to exit and save settings.
18) Return to the main screen by pressing End Call and you should see your phone getting signal
19) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.

Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated

How to get the Browser to work on the Storm (Includes Service Books for email to function as well):

How to Enter Unlock Codes on Verizon BlackBerry Storm 2 (9550):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: At&t, T-mobile)
For Unlocking Storm 2: Try the unlock process with a SIM card besides Verizon
3) Turn on the phone
4) If Phone prompts for a code, try entering the code where it says 'Enter Network MEP Code'. If says 'Code Error, Please Wait..' follow the instructions from Step 4. For any reason if that way still doesn't prompt for a code, retry entering the code as phone boots up again and it should work fine now.
5) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
6) Press End Call (Red button)
7) Inside Settings menu, Click Options, then Mobile Network, on the switch technology to 'Global' if that has not been done.
Exception: If phone prompts 'Would you like your Blackberry to automatically select CDMA or GSM based on network availability', select No.
8) Now click the Back Arrow Button (Next to the Red End Call button) and select Advanced Options and then SIM Card
9) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
10) Press following buttons: mepd or meppd- If 'Network' says 'Active', phone is locked and continue doing instruction Step #11. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #11 since prompt will not show for unlocked phones. If 'Network' says 'Unknown' this means the phone has no SIM inside the phone or that the phone is not recognizing the SIM card and you need to insert a different SIM card. If 'Network' says 'Blocked' this means the phone is already hardlocked due to too many wrong attempts and there is nothing to do to unlock this phone
11) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
Exception: If nothing is prompting up and you are making sure you are selecting each button by press the screen in, do a wipe handheld to reset the phone to manufacturer default: http://forums.crackberry.com/showthread.php?t=110075
12) Enter the 8 digit unlock code, Remember you ONLY have 10 chances to get it right
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is a glitch on the phone
13) Press the Enter key (Button that looks like a backwards L arrow)
14) A message will appear saying Code Accepted
15) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
16) Turn the phone back on
17) Go to Settings, then Options, then Mobile Network, on the third row switch Network Technology to GSM/UMTS.
18) Press the Back Arrow Button to exit and save settings.
19) Return to the main screen by pressing End Call and you should see your phone getting signal
20) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.

Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated

How to Enter Unlock Codes on Verizon/Sprint BlackBerry Tour (9630):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings
5) Go to Options
6) Go to Advanced Options
7) Go to Sim Card
8) Press following buttons: mepd or meppd- If 'Network' says 'Active', phone is locked and continue doing instruction Step #9. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #9 since prompt will not show for unlocked phones. If 'Network' says 'Unknown' this means the phone has no SIM inside the phone or that the phone is not recognizing the SIM card and you need to insert a different SIM card. If 'Network' says 'Blocked' this means the phone is already hardlocked due to too many wrong attempts and there is nothing to do to unlock this phone
9) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
10) Enter the code, Remember you ONLY have 10 chances to get it right
11) Enter the 8 or 16 digit unlock code and then press trackball to confirm and your phone is unlocked!
12) A message will appear saying Code Accepted
13) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
14) Turn the phone back on
15) Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS.
16) Set Network Mode to 3G & 2G.
17) Press the Back Arrow Button once to exit and save settings.
18) Inside the Manage Connections, set Mobile Network to on.
19) Return to the main screen by pressing End Call and you should see your phone getting signal
20) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again

Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.

VERIZON TOURS ONLY: Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated

SPRINT TOURS: If you need to remove the Activation Required, you will need to get the MSL code to remove it. Contact me on costs.

How to get the emails to work on the Tour (These are the Service Books for email to function correctly):

How to Enter Unlock Codes on Blackberry Vodafone Storm (9500):

1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Go to Settings, then Options, then Advanced Options, then SIM Card
7) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
8) Press following buttons: mepd or meppd- If 'Network' says 'Active', phone is locked and continue doing instruction Step #10. If 'Network' says 'Inactive' or 'Disabled', phone is already unlocked, no need to do Step #10 since prompt will not show for unlocked phones. If 'Network' says 'Unknown' this means the phone has no SIM inside the phone or that the phone is not recognizing the SIM card and you need to insert a different SIM card. If 'Network' says 'Blocked' this means the phone is already hardlocked due to too many wrong attempts and there is nothing to do to unlock this phone
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
10) Enter the 8 or 16 digit unlock code, Remember you ONLY have 10 chances to get it right. http://www.blowfish06.com
11) Press enter and your phone is unlocked!

How to Enter MSL Code (THIS IS FOR MSL/SPC CODES, NOT UNLOCK CODES) on Sprint BlackBerry Tour (9630):

1) From the mainscreen of the BlackBerry, press the green call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear

Categories